SIP panels and insulation
SIP panels for a house extension: joining the new section to the existing building
At a glance
An extra room, a study or a larger kitchen often calls for extending the house. SIP panels with a polyurethane core can be one of the solutions for the new part. The English term SIP Panels stands for structural insulated panel. Prefabricated elements make it easier to prepare the building envelope, but their selection begins with an assessment of the existing building. The old and new parts must work together in accordance with the design. Before ordering the panels, a survey is needed. The actual dimensions of an older house may differ from the documentation. Levels, verticals and the condition of the wall against which the extension will be built must be checked. Earlier alterations, cracks and traces of moisture also matter.

Measure and assess what is already standing
The new element should not conceal an unidentified defect.
The assessment covers the foundations and the feasibility of creating a new opening. The opening between the sections may change how the existing wall behaves. This requires establishing the support and the sequence of works. Ready-made SIP panels do not automatically resolve the question of the lintel or reinforcements. These elements should be described before a gap is created in the existing wall.
Separate the decision about the enclosure from the decision about the foundations
Lightweight technology can reduce the weight of the new walls compared with some masonry solutions. This does not mean there is freedom in the foundation design. The ground, the depth of the existing foundations and the loads influence the choice of solution. The new section must be given proper support and protection against water.
The designer also decides how to allow for possible differences in the movement of the two sections. The need for and the course of the expansion joint follow from the conditions of the specific building. It should not be replaced by a random gap filled with foam. Such a junction simultaneously has a structural, thermal and weather-related function. All these functions must be coordinated.
The narrow connecting strip has several tasks
A continuous sealing layer is needed between the old wall and the panel. Materials may have a different texture and absorption. Tapes and sealants are therefore also selected to suit the substrate and the application conditions. Merely pressing the OSB facing against the plaster does not guarantee a durable seal. The junction should remain clearly shown on the construction drawing.
From the outside, water runoff must be ensured without directing it into the gap. This applies to the vertical junction of the façade and to the point where the roof connects to the old wall. The flashings must take account of the planned movements and the layer build-up. It is worth checking this stage before the facings are installed, when any correction still requires only a small scope of work.
The polyurethane core helps in a confined space
In an extension, the available width or height is sometimes a constraint. A PUR or PIR core with a low lambda value allows the required thermal resistance to be achieved with a smaller thickness than insulation with a higher lambda value. This can make it easier to match the wall to the existing building form. However, the dimension must be calculated after adding all the finishing layers.
EPS panels can also form an insulated enclosure. When comparing them with polyurethane panels, specific thermal values and equivalent solutions must be set against each other. A thinner wall assembly is not the only criterion. Loads, fire requirements, acoustics and the way installations are routed in the new room are also important.
Take care of the former façade zone
After extending the building, part of the external wall may end up inside the house. It is worth checking which old layers should remain and which need to be removed. What matters is the condition of the substrate, moisture and the planned finish. The decision should not be based solely on the wish to quickly cover an uneven surface.
New insulation changes the temperature distribution in the vicinity of the junction. Details at the floor, the former corner and the ceiling may become areas with weaker parameters. Checking thermal bridges helps reduce the risk of cold surfaces. A good lambda value of the panel’s main field alone does not describe the behaviour of these atypical sections.
Plan the works with the residents in mind
Prefabrication makes it possible to prepare the elements before the old house is opened up. It is worth using this possibility in the schedule. First, the delivery date, unloading and protection of the new part against rain must be established. Only then are the works that will expose the rooms in use planned. The time on the construction site depends on the entire scope.
Access to the wall from outside and space for storage must be provided for. A small plot can make it difficult to lift larger panels. In such a case, the division of the elements must be adjusted before production. Agreeing the format and the installation sequence helps reduce improvisation and the moving of boards through the part of the house in use.
The schedule should also include the point at which the installations are switched over and the opening into the new room is made. It is good to know who will secure the opening in the event of a break in the works. A prefabricated wall set helps to plan this stage, but it does not remove the time needed for trims and sealing. The house can be safely opened to the new part only in accordance with the established sequence of works.
The new room needs its own comfort assessment
The extension may change the air circulation and the heating demand. An installation that previously worked correctly requires rechecking. A large window, a different orientation and tighter building envelopes affect the conditions in the new part. It is worth determining the supply air, extract air and temperature control before the build-up is closed.
Finally, the complete set of documents and the completed connections should be checked. Photographs taken before covering will facilitate later maintenance. SIP panels are useful in an extension when their advantages match the limitations of the specific house. A carefully resolved junction with the older part allows the benefits of prefabrication and the effectiveness of polyurethane insulation to be used.
7 branches. Materials closer to your project.




