About PiVi

This author has not yet filled in any details.
So far PiVi has created 1593 blog entries.

What to consider when planning a hipped roof structure

The key decision for a hipped roof is to agree the support layout with the attic needs early, before the truss design is produced. It is worth checking where the structure can safely transfer loads to walls, columns and the floor, and how room arrangement will affect the possible schemes. Corners and shorter rafters collect forces from a larger area, so their sections require calculation rather than copying from a gable roof. The planned covering material, openings and services must also be considered at this stage.

By |2026-11-14T23:26:53+01:002023-12-15|Construction basics|Comments Off on What to consider when planning a hipped roof structure

Can EPS insulation be used in a green roof?

EPS can be part of a green roof if the selected grade suits its construction and loads. In a traditional build-up it sits beneath the waterproofing. Plants, substrate and drainage form further layers with their own requirements. The weight when saturated, root protection and access to the drainage must be checked. In a traditional build-up EPS lies below the watertight covering. Above the waterproofing are the layers needed for protection, drainage and water retention, and for plant growth. This sequence allows suitable roof insulation to be used, shielded from precipitation. However, this does not mean that any façade EPS is suitable beneath a roof garden.

By |2026-11-16T06:08:30+01:002023-12-10|Construction basics|Comments Off on Can EPS insulation be used in a green roof?

What can a 60 mm mineral wool wall panel be used for, and what about the 40 mm version?

A thin mineral wool panel may be considered where a slim-profile cladding is important. However, good thermal performance or a specific fire resistance should not be assumed in advance. A range starting from 60 mm in one system does not mean that all panels on the market begin at the same point. The 40 mm version must be checked separately. A partition between two rooms at a similar temperature performs differently from a workshop wall facing the yard. In the first case, the temperature difference may be small. In the second, heat loss, the internal surface temperature and the requirements of the whole building must be assessed. The nominal thickness does not explain these differences.

By |2026-11-14T10:16:17+01:002023-12-08|Construction basics|Comments Off on What can a 60 mm mineral wool wall panel be used for, and what about the 40 mm version?

Metal picket fencing for a seasonal home: making upkeep easier

At a house visited seasonally, it is worth limiting the work that has to be repeated after every arrival. Metal fence pickets with a factory coating do not require the same care as untreated wood. This does not mean, however, that they can be completely forgotten. The choice of material should take into account the surroundings, access for cleaning and the length of absences. The most convenient fence is one whose condition can be quickly assessed and maintained without complicated procedures. A seasonal house can stand in very different conditions. An open plot, a damp environment and proximity to sources of contamination are not the same environment. Coatings have specific limitations of use. Under special conditions, for example elevated salinity, confirmation of the suitability of the chosen material must be obtained. A general declaration of weather resistance is not enough.

By |2026-11-15T18:27:07+01:002023-12-03|Construction basics|Comments Off on Metal picket fencing for a seasonal home: making upkeep easier

What does non-combustible core mean in a wall panel with mineral wool?

Mineral wool can form the non-combustible core of an insulated wall panel with a mineral wool core. However, this does not mean that all components of the complete product receive the same class as the insulation material itself. When selecting a wall, a distinction must be made between reaction to fire and fire resistance. Each of these pieces of information answers a different question regarding the behaviour of the building element. In addition to the wool, the panel contains steel facings, bonding layers and coatings. The joint may include additional seals. When assessing the product, these parts cannot be omitted and the class of the core material cannot be transferred to the whole. This is a similar error to determining the load-bearing capacity of a wall solely on the basis of the sheet thickness.

By |2026-11-14T10:16:31+01:002023-12-03|Construction basics|Comments Off on What does non-combustible core mean in a wall panel with mineral wool?

How much does a house with sandwich panels cost when the full scope is priced?

The price of the panels is not the price of a house ready to move into. The shell is joined by the structure, foundations, services and finishing, as well as solutions ensuring comfort. A sensible budget starts from one scope of works. The example below shows the method of calculation using contractual amounts; it is neither a market price list nor a sales offer. One quote may cover only the frame and panels. A second will add windows and doors, and a third services and floors. These sums do not describe the same result. Before comparing, note what is to function on the day of handover and what works will remain on the investor's side.

By |2026-11-14T12:37:20+01:002023-11-30|Construction basics|Comments Off on How much does a house with sandwich panels cost when the full scope is priced?

What is tile-effect metal roofing made of and what protects its steel core?

Tile-effect metal roofing is thin steel sheet formed to create a repeating tile pattern. However, its strength and durability do not come from the pattern alone. The steel core, surface protection and the way the roof is installed are what matter. It is worth separating these elements, because a colour description and a long warranty do not replace technical data. The basis is steel of a specified thickness and properties. Pressings give the thin sheet its shape and influence how it performs. Popular products often have a 0.5 mm core, but other variants also exist. The order must state the specific thickness, not just the term “strong sheet”.

By |2026-11-14T10:15:22+01:002023-11-21|Construction basics|Comments Off on What is tile-effect metal roofing made of and what protects its steel core?

Before repainting a metal roof: checking the coating, corrosion and surface condition

Before painting a metal roof, check whether the substrate will still do its job once prepared. Inspect the sheets, flashings and fixings, and look underneath the covering where you can reach. Perforation, deep corrosion or permanent deformation may mean an element needs replacing, since a new coating will not restore sheet thickness or correct a faulty lap. Identify the existing coating, assess corrosion and clean the surface. Fresh colour will not mend a leak or lost steel, so remove the causes of damage first and choose a compatible paint system. Weather and adhesion to the old surface affect how long the work lasts.

By |2026-11-14T23:28:47+01:002023-11-20|Construction basics|Comments Off on Before repainting a metal roof: checking the coating, corrosion and surface condition

How to choose an insulated panel for a cattle shed, poultry house or piggery?

In an animal building, the panel performs differently than in a dry warehouse. It must work together with the ventilation, withstand moisture and suit the cleaning method. The requirements of a cattle shed, poultry house and piggery also differ. It is worth starting the selection with a description of daily use, and only then comparing the core, thickness and price of the individual variants. Selection requires information on temperature, humidity, type of livestock farming and ventilation operation. The frequency of cleaning, the agents used and areas of prolonged dampness are important. Two buildings called a cattle shed may have completely different conditions at the wall and roof surfaces.

By |2026-11-14T12:34:24+01:002023-11-20|Construction basics|Comments Off on How to choose an insulated panel for a cattle shed, poultry house or piggery?

Moss on tile-effect metal roofing: choosing a cleaning method that protects the finish

Begin by establishing why the surface stays damp for long periods, rather than reaching straight for the strongest preparation. Check whether organic material accumulates in shaded areas and whether water drains freely around the flashings. Match the method to the type of coating, since sharp scraping and strong chemicals can damage the protective layer. Before cleaning the whole slope, carry out a gentle trial on a less visible section and assess the result once dry. Remember the gutters and outlets too, so that loosened debris does not block the drainage.

By |2026-11-14T23:27:21+01:002023-11-17|Construction basics|Comments Off on Moss on tile-effect metal roofing: choosing a cleaning method that protects the finish