About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

SOPREMA EFIGREEN ITE: connecting façade insulation with the roof

The wall insulation with EFIGREEN ITE meets the roof insulation. At the junction, two systems with different protective layers and fixings come together. The design should show how they connect, instead of ending both drawings at the same notional line. Thermal continuity does not, however, relieve you of the need to resolve the rain and ventilation provided for in the façade. The section under consideration covers the external thermal insulation of the wall with the façade cladding. The EFIGREEN ITE task must be described together with the layers adjoining its surface. The basis for the agreement is the section of the connection between the wall and the roof and the termination of the flashing.

By |2026-11-16T01:36:08+01:002025-12-27|Construction basics|Comments Off on SOPREMA EFIGREEN ITE: connecting façade insulation with the roof

Can you step onto a sandwich panel roof for an inspection?

A sandwich roof panel is not automatically a surface for unrestricted walking. Access during installation or inspection may be permitted under specific conditions that must be known before work begins. The entire support system, the condition of the covering, local loads and the protection of people all matter. The core thickness alone does not provide the answer. Cleaning a drain, checking a seal and servicing equipment may require different access points. Part of the inspection can be carried out from a safe position next to the roof. A route across the roof slope should not be chosen solely because it appears to be the shortest path.

By |2026-11-14T16:27:44+01:002025-12-26|Construction basics|Comments Off on Can you step onto a sandwich panel roof for an inspection?

100 mm mineral wool panel in the workshop: warmth, weight and wall cost

A thickness of 100 mm often appears in wall panel comparisons. However, it is not a complete specification. Panels of the same thickness can have different weights, joint systems and thermal properties. Before choosing for a repair workshop, check the specific configuration and the conditions of the entire wall. The price per square metre then becomes useful information. A panel consists of a core, facings and formed connections. Thickness describes only one characteristic of this assembly. Density and the arrangement of the mineral wool, the sheet profiles and the fixing method can vary. For this reason, parameters from the first table found should not be copied to any 100 mm product.

By |2026-11-14T10:16:18+01:002025-12-25|Construction basics|Comments Off on 100 mm mineral wool panel in the workshop: warmth, weight and wall cost

Square or half-round gutters for a house – how to choose the section

Begin by checking whether the chosen system delivers the required performance and can be correctly fitted to the specific eaves, and only then compare appearance. The profile shape alone does not determine how much water is carried away, so compare complete solutions with parameters suited to the same roof. Also assess the eaves details, availability of corners and later servicing. On a complex building form, check whether components for non-standard angles are available. Once both variants meet the requirements, an aesthetic choice is justified.

By |2026-11-15T03:30:39+01:002025-12-19|Construction basics|Comments Off on Square or half-round gutters for a house – how to choose the section

Garage roofs in trapezoidal steel sheet or insulated sandwich panels

First decide whether the garage will be heated, as this organises the choice between trapezoidal sheet and sandwich panel. In an unheated building, sheet works if the design provides ventilation and limits condensation; in a heated one, a sandwich panel makes insulation easier. Check the building's function, roof pitch and the load capacity of the existing structure, plus how it will be used in a few years. Compare complete roofs, not just material prices, and remember that a wet car brings moisture that must be removed.

By |2026-11-15T03:29:46+01:002025-12-18|Construction basics|Comments Off on Garage roofs in trapezoidal steel sheet or insulated sandwich panels

Metal pickets by a patio: screening without a solid wall

A place to relax needs a different fence from a driveway. At the terrace, what matters is the view from the chair, the distance from the neighbour and the amount of light. Metal fence pickets allow you to build screening with a chosen rhythm. However, not every configuration will produce the same effect. The height of the bay alone is not enough to assess privacy. Gaps, level differences and the direction of view must be taken into account. This concerns a fence by the terrace on the ground, not a balustrade protecting against a fall. First, mark the seating positions. Then check the view from the pavement side, the neighbouring garden and the entrance to the property. Screening may work well in one direction and poorly in another. If the terrace is higher than its surroundings, changing the spacing of the pickets alone will not solve the whole problem. A sketch taking into account levels and observation height is needed.

By |2026-11-15T18:26:13+01:002025-12-18|Construction basics|Comments Off on Metal pickets by a patio: screening without a solid wall

Thermano GK at wall-to-roof junctions: continuous internal layers

In a loft, a good result is hard to achieve if the insulated wall does not connect correctly to the slope. Thermano GK requires this junction to be planned. Airtightness, the termination of the boards and the continuity of the thermal layer must be established before the finishing work is carried out. Thermano GK-A and Thermano GK-H2 combine a PIR core with gas-tight facings and a 12.5 mm plasterboard. The GK-A variant has a white facing for typical dry rooms. When selecting PIR boards for the assembly, mark on the actual cross-section drawing which is chosen in a room with a defined function: the white GK-A facing or the green GK-H2. The GK-A or GK-H2 variant must be assigned to the function and conditions of use of the room, because the remaining layers must match the same solution.

By |2026-11-16T01:35:27+01:002025-12-16|Construction basics|Comments Off on Thermano GK at wall-to-roof junctions: continuous internal layers

What should you check before replacing a roof covering?

Safe roof covering replacement depends above all on diagnosing the roof's condition beforehand, not merely on buying new sheets. Before the crew goes onto the slope, the structure should be assessed and protection for the open building and the unloading area planned. It is worth checking whether stains and deflections stem from the covering, flashings or vapour condensation. The load-bearing capacity of the trusses should be assessed by someone with structural knowledge, since even a lighter material does not justify leaving weakened supports in place.

By |2026-11-14T16:28:56+01:002025-12-15|Construction basics|Comments Off on What should you check before replacing a roof covering?

When can a roof be repaired and when is replacement needed?

Whether a roof needs repair or replacement depends chiefly on whether the cause of the problem can be removed, not on the age of the covering. It is worth checking whether the fault is local or repeats across many slopes, and assessing the condition of the structure and insulation. A map of problems and the history of earlier fixes can be more useful than a single photo of a leak. Readers should focus on the scope of the proposed work, how it will connect to the existing covering, and whether the repair restores function rather than just appearance.

By |2026-11-14T23:26:33+01:002025-12-14|Construction basics|Comments Off on When can a roof be repaired and when is replacement needed?

Refurbishing a farm building envelope: where can sandwich panels be used?

Replacing the envelope of an agricultural building requires an assessment of the condition of the supports, the way the rooms are used and the conditions on both sides of the new building envelope. Sandwich panels can combine cladding with insulation, but their selection does not end with the core thickness. The spacing between supports, the resistance of the surface to the farm environment and the detailing of openings are also important. In the Sandwich-panel.pl guide we show how to prepare the scope of a roof or wall replacement, check the connections to the existing building and describe the requirements for the contractor. A soffit made of PIR insulation boards requires a separate design: it should not be treated as a substitute for a roof sandwich panel. The starting point is a drawing of what remains and what is to be dismantled.

By |2026-11-15T18:27:09+01:002025-12-12|Construction basics|Comments Off on Refurbishing a farm building envelope: where can sandwich panels be used?