When is it worth additionally insulating a roof made of sandwich panels?

A roof panel already has an insulation layer, so it does not automatically require a second insulation. The question usually arises after a change in the building's use or when there are problems with cold and water. First, the cause must be established. Adding material can change the moisture conditions and the roof load, and not every problem results from a core that is too thin. A former warehouse can become a workshop used all day. Then the temperature, heating time and amount of moisture change. A roof chosen for the earlier function requires re-examination. This does not yet mean that the only solution will be to glue insulation from below.

2026-11-14T12:37:40+01:00

How to choose and install a rainwater gully at the foot of a downpipe

A downpipe gully traps some debris, yet it will not fix an inefficient pipe or a poorly planned rainwater outlet. Before buying, establish the downpipe and drainage pipe diameters, the connection direction and the free space. Confirm that the model suits a round or rectangular pipe. Plan the cover position relative to the final ground level and ensure easy access to the basket.

2026-11-14T19:55:10+01:00

Six ways to reduce the risk of wind damage to a roof

A roof's wind resistance depends above all on a coherent fixing system, not on the weight of the covering alone. Check whether the design identifies corner and edge zones and whether the fasteners match the substrate and component thickness. Equally important are verification of tightening and, during renovation, the condition of the existing structure. Leave the choice of variant to the designer, since wind conditions depend on location, height, shape and surroundings. The documentation should link material, fasteners and fixing layout into a single whole.

2026-11-14T19:48:32+01:00

Which types of metal roofing suit contemporary buildings?

A modern building does not require one type of covering – both the calm surfaces of modular metal tiles and the pronounced rhythm of trapezoidal profiles can suit it. Before choosing a material, however, you need to establish the actual roof pitch, the length of the drainage path and the locations of planned penetrations. Only then is it worth comparing profiles. Appearance itself must be combined with roof angle, structure and insulation needs. A well-chosen detail at the eaves and corners often has a greater effect than colour. It is worth checking the project specifications and any constraints on roof form, because changing the profile can affect batten spacing and structural load.

2026-11-14T16:30:23+01:00

How to combine a metal roof covering with effective thermal insulation

The metal sheet alone does not determine a roof's insulation performance — the entire layer build-up matters, not the choice of covering profile. Readers should first establish the boundary of the heated part of the building and check whether the design provides one continuous thermal envelope, including stairs, the roof hatch and service penetrations. It is worth verifying that insulation is not interrupted at the wall plate, windows and dormers, and that the ventilation channel beneath the covering remains clear. The thickness of PIR boards is selected according to the required thermal resistance, not the sheet itself.

2026-11-14T16:30:19+01:00

How should you plan the anchoring of a steel hall in a concrete foundation?

The column-to-foundation connection transfers forces from the hall to the substrate. A chemical anchor is one way of making such a fixing, but it must be selected to suit the concrete, the loads and the geometry of the base plate. There is no single rod or single hole depth suitable for all halls. The work begins with the design of the connection. The connection may be subject to tension, shear and bending moment. The condition of the concrete, the edge distances and the spacing between anchors also matter. The capacity of a single anchor from a table cannot simply be multiplied by the number of rods and taken as the capacity of the base. The group of fasteners acts together with the concrete and the base plate.

2026-11-14T12:35:37+01:00

When does a solar roof work well with a farm cold store?

A cold store can consume a lot of energy during sunny weather, which favours making use of the PV roof's output. This does not, however, mean that the load fully matches the operation of the cells. Refrigeration equipment also runs at night, and storage requirements are constant. An integrated roof is therefore worth considering as part of a larger plan for the facility. It allows a new covering to be combined with an on-site energy source, without separate panels above the roof slope. On warm days the cooling demand can be high. In the same period the roof can produce a considerable amount of energy. This is a favourable starting point for analysing self-consumption, that is, using the electricity on site. The assessment must, however, be based on measurements or a reliable operating plan, and not on the mere association of summer with sunshine.

2026-11-15T18:27:33+01:00

Metal picket fencing around outbuildings: dividing the site into usable areas

A fence next to an outbuilding is primarily there to organise the site. It separates the driveway from the garden, marks the boundary of the working area and gives the property a coherent appearance. Metal fence pickets can serve these purposes as infill in appropriately designed bays. However, they are not a solution for every type of activity. Before you choose a colour, look at the surroundings. Moisture, fertilisers, dust and chemicals can matter more than the appearance of the fence itself. A different layout is needed along the driveway to the garage than next to a quiet area at the back of the garden. First, draw out the routes used by people and vehicles. Mark where doors open, where unloading takes place and where equipment is stored. Metal pickets should not narrow these spaces or block the view needed when manoeuvring. A well-chosen fence works with the everyday organisation of the property.

2026-11-15T18:26:27+01:00

Six advantages of metal fence pickets to consider before buying

Metal pickets are worth considering when you want a visually light fence without the need to oil or impregnate wood. Before buying, however, check not only the coating and finish but also the condition of existing posts and rails and the method of installation, as these determine durability. Pay attention to the spacing of the pickets, which affects visibility and privacy, and to whether a ready-made set will allow an even rhythm of bays on uneven ground. It is also worth assessing how the inner side looks and whether a single element can be replaced later.

2026-11-14T16:28:52+01:00

A modular steel building or a bespoke design – what determines the choice?

The company needs additional warehouse space, and there is a free rectangle on the plot. In such a situation, a modular hall seems the obvious choice. This changes when a long production line, a tall machine or a wide overhead crane has to go into the building. The choice should not be decided by the name of the system alone. First, the company's needs must be compared with the scope covered by a ready-made steel structure. Modular steel structures use repeatable components and a fixed geometry. The system may provide for several widths, a specified frame spacing and extension of the steel hall by further bays. As a result, part of the design and production work does not start from scratch. The supplier knows which components need to be prepared for a given variant.

2026-11-15T03:32:00+01:00