About PiVi

This author has not yet filled in any details.
So far PiVi has created 1593 blog entries.

What to check when the north wall is damp and stains appear?

A stain on the north wall does not automatically mean that thicker insulation needs to be applied. Water may be coming from outside or condensing on a cold surface. Several causes often overlap. It is worth first establishing when the problem occurs and how it changes after rain, after heating the room and after moving furniture away. Moisture after rainfall suggests checking the façade, flashings and gutters. A problem that worsens during frost may indicate an excessively cold surface and humid indoor air. A stain near a pipe or under a windowsill requires a different check. The direction of the wall alone does not determine the cause.

By |2026-11-14T10:16:54+01:002022-11-19|Construction basics|Comments Off on What to check when the north wall is damp and stains appear?

Comparing metal roofing costs with other coverings using a cutting plan

Before comparing the cost of metal sheeting with other roof coverings, decide whether you are choosing a variant for the whole roof or only part of the slope — this determines the scope of the estimate. Check that the offers cover the same drawing, actual dimensions, pitch, valleys, dormers, chimneys and windows, and how the loft will be used. For a renovation, first assess the condition of the structure, as repairs and dismantling depend on it. Only then compile complete amounts including substrate, flashings, transport and installation, on the same net or gross basis.

By |2026-11-15T03:29:49+01:002022-11-18|Construction basics|Comments Off on Comparing metal roofing costs with other coverings using a cutting plan

Metal roof maintenance: when to schedule an inspection and when to bring it forward

The frequency of inspecting a metal roof depends primarily on the specific material's instructions, the building's surroundings and weather events. It is worth checking whether an annual inspection is sufficient in the given conditions or whether additional checks are needed after a gale, hail or work by other teams. Maintenance includes cleaning and repairing identified damage, but does not mean automatic painting or tightening every screw. For a building under trees or in a demanding environment, the plan should match actual conditions rather than just the calendar.

By |2026-11-14T23:26:37+01:002022-10-19|Construction basics|Comments Off on Metal roof maintenance: when to schedule an inspection and when to bring it forward

Choosing a roofing contractor: how to assess the quotation

Start by putting the offers into a single table, because comparing prices per metre alone usually says nothing about the scope of work. Establish who is responsible for measurements and for accepting details that will disappear under the covering, and ask for a quote based on the same materials and accessories. For a renovation, add attic photos and information about leaks — an estimate from the elevation alone is preliminary. Choose a team that knows the given system, not merely one experienced in laying roof tiles.

By |2026-11-14T16:28:54+01:002022-10-18|Construction basics|Comments Off on Choosing a roofing contractor: how to assess the quotation

SOPREMA PIR beneath bituminous and synthetic roofing membranes

Let us consider a penetration for which the drawing shows only the outline of the opening in the PIR. There is no information on how the vapour control layer is penetrated or how the covering is turned up. In a system with BLUE A, a full detail covering all layers is required. A description of carefully filling the gap alone does not define the function of the missing connections. The EFYOS BLUE A task must be described together with the layers adjoining its surface. Before selecting materials, the position of all layers at the base of the rooflight must be established so that the sequence of layers has a real reference.

By |2026-11-16T01:36:10+01:002022-10-15|Construction basics|Comments Off on SOPREMA PIR beneath bituminous and synthetic roofing membranes

Planning mineral wool panel walls around the way a building will be used

A wall panel with mineral wool is a ready-made cladding element that combines an insulating core with steel surfaces. To perform well in a workshop or studio, it must work together with the structure and details. The following guide leads through the most important decisions: from the way the premises is used to subsequent cleaning, inspections and changes to the fit-out. The core is made of mineral wool in a configuration intended for the panel. In lamella solutions, the fibres are oriented perpendicular to the facings. The steel surfaces are bonded to it, so that the whole element can act as a sandwich panel. It is not a loose mat inserted between two independent sheets.

By |2026-11-14T10:16:35+01:002022-10-11|Construction basics|Comments Off on Planning mineral wool panel walls around the way a building will be used

What should a practical roof installation course cover?

Good roofing installation training should above all let participants independently complete key details on a specific system, not merely watch a demonstration. Before signing up, check whether the programme clearly states its prerequisites and how much time is devoted to exercises with instructor correction. Do the sessions cover substrate preparation, fixings, flashings and fault diagnosis? Completing a short course alone does not replace experience or knowledge of safe working practices, so assess whether the scope matches your level of experience.

By |2026-11-15T03:31:15+01:002022-10-10|Construction basics|Comments Off on What should a practical roof installation course cover?

Why choose corrugated fibre cement sheets for farm buildings?

Fibre cement sheets have a specific job to do on the farm. They protect the building from the weather and form a durable covering with a corrugated profile. They are well suited to cowsheds, warehouses and open sheds if they match the structure and the operating conditions. Asbestos-free fibre cement should be assessed against these conditions, not by its mere resemblance to an old roof. In an open shed, the biggest problem is often rain driven in under the roof pitch. In a livestock building, moisture is added and constant air exchange is needed. A grain store, in turn, requires the stock to be protected from water. One material can be used in each of these places, but the roof layout will not be the same everywhere.

By |2026-11-15T18:28:31+01:002022-10-10|Construction basics|Comments Off on Why choose corrugated fibre cement sheets for farm buildings?

Above-rafter insulation with swissporPIR Alu: layer sequence and functions

swissporPIR Alu can provide continuous thermal insulation above the rafters of a pitched roof. The PIR core is faced on both sides with a gas-tight laminate, but the other functions require separate solutions: the fixings transfer loads, the preliminary covering drains precipitation, and sealing from the inside limits the flow of moist air. Their interaction must be shown in particular at the eaves, the chimney and the windows. The guide explains the preparation of the support, the connection of the insulation to the façade, and the effect of the new layers on the position of the gutters and flashings. Good thermal insulation does not guarantee a uniform attic temperature in summer; windows, shading, ventilation and internal gains also matter.

By |2026-11-16T06:07:01+01:002022-10-04|Construction basics|Comments Off on Above-rafter insulation with swissporPIR Alu: layer sequence and functions

What role does the wall plate play in a roof structure?

The wall plate transfers loads from the roof truss to the reinforced concrete ring beam, but its selection depends on the specific rafter layout and roof working conditions. Before covering, it is worth checking not only the cross-section but also the anchorage, the condition of the substrate and the rafter connections. The key question is whether a safe load path continues through the knee wall down to the foundations. The element alone will not repair a weak ring beam or defects in the support. Even with lightweight roofing, snow and wind loads cannot be ignored, and design decisions should be left to a specialist.

By |2026-11-14T16:30:47+01:002022-09-25|Construction basics|Comments Off on What role does the wall plate play in a roof structure?