What should a practical roof installation course cover?

Good roofing installation training should above all let participants independently complete key details on a specific system, not merely watch a demonstration. Before signing up, check whether the programme clearly states its prerequisites and how much time is devoted to exercises with instructor correction. Do the sessions cover substrate preparation, fixings, flashings and fault diagnosis? Completing a short course alone does not replace experience or knowledge of safe working practices, so assess whether the scope matches your level of experience.

2026-11-15T03:31:15+01:00

Why choose corrugated fibre cement sheets for farm buildings?

Fibre cement sheets have a specific job to do on the farm. They protect the building from the weather and form a durable covering with a corrugated profile. They are well suited to cowsheds, warehouses and open sheds if they match the structure and the operating conditions. Asbestos-free fibre cement should be assessed against these conditions, not by its mere resemblance to an old roof. In an open shed, the biggest problem is often rain driven in under the roof pitch. In a livestock building, moisture is added and constant air exchange is needed. A grain store, in turn, requires the stock to be protected from water. One material can be used in each of these places, but the roof layout will not be the same everywhere.

2026-11-15T18:28:31+01:00

Above-rafter insulation with swissporPIR Alu: layer sequence and functions

swissporPIR Alu can provide continuous thermal insulation above the rafters of a pitched roof. The PIR core is faced on both sides with a gas-tight laminate, but the other functions require separate solutions: the fixings transfer loads, the preliminary covering drains precipitation, and sealing from the inside limits the flow of moist air. Their interaction must be shown in particular at the eaves, the chimney and the windows. The guide explains the preparation of the support, the connection of the insulation to the façade, and the effect of the new layers on the position of the gutters and flashings. Good thermal insulation does not guarantee a uniform attic temperature in summer; windows, shading, ventilation and internal gains also matter.

2026-11-16T06:07:01+01:00

What role does the wall plate play in a roof structure?

The wall plate transfers loads from the roof truss to the reinforced concrete ring beam, but its selection depends on the specific rafter layout and roof working conditions. Before covering, it is worth checking not only the cross-section but also the anchorage, the condition of the substrate and the rafter connections. The key question is whether a safe load path continues through the knee wall down to the foundations. The element alone will not repair a weak ring beam or defects in the support. Even with lightweight roofing, snow and wind loads cannot be ignored, and design decisions should be left to a specialist.

2026-11-14T16:30:47+01:00

XPS in an unheated warehouse: what does moisture resistance mean?

An unheated warehouse can also have a damp floor and cold surfaces. Water enters through open gates, comes from the ground, or condenses from the air. XPS is considered in such buildings because of its low water absorption and mechanical properties. Before it is placed under the floor finish, however, the purpose of the insulation must be established. Extruded polystyrene does not dry the air and does not replace ventilation or protection against water. A wet surface does not always mean a leak from the ground. When a warehouse is opened on a warm, humid day, vapour can condense on the cool floor. Another cause is water brought in by vehicles or a leaking roof.

2026-11-16T06:07:20+01:00

α-therm WALL: joining IDELCO boards in a cavity wall

IDELCO α-therm WALL is a PIR board with aluminium laminate on both faces, intended for insulating cavity walls. In the cross-section it restricts heat flow, while the masonry, the wall ties and the outer leaf perform their own functions. Selection therefore covers both the insulation thickness and its connection to the reveal, lintel, sill and base. The required cavity geometry must be maintained and drainage of water must be provided for. The laminate and the tongue-and-groove joint do not replace flashings or structural elements. Below we discuss how these parts of the wall work together, how to set out the boards and how to check the edges before they are covered. The broader term “polyurethane boards” is not sufficient to identify the WALL variant.

2026-11-16T06:03:46+01:00

T18 and T35 wall cladding: how to choose the profile

When choosing trapezoidal sheet for a façade, first check that the profile is approved for wall mounting. T18 and T35 differ in rhythm and shadow, but sheet thickness, supports and coating also matter. Plan the laying direction, how openings are finished and how water drains from the whole assembly. Wall cladding is an outer shield or part of a wider build-up, so it needs documentation for the specific use. The T18 or T35 label identifies a profile family, not every dimension and parameter.

2026-11-14T23:24:58+01:00

What do roof battens and counter-battens do?

Purlins and counter-purlins serve distinct functions, so when choosing the batten layout it is best to start from the roofing system's requirements rather than from ready-made spacings. Purlins support the sheeting and mark the fixing points, while counter-purlins create a ventilation gap above the underlay. The building owner and the trade should check the layer build-up, the route for moisture drainage and the load-bearing capacity of the supports. Note that dimensions and spacings are not universal – even similar profiles may need a different arrangement. Leave the detailed design decisions to the designer.

2026-11-14T23:27:20+01:00

How are rafter dimensions and spacing determined?

Choosing rafter size and spacing relies on calculations for the particular building. Span, support method, timber class and loads from the covering, snow and wind all matter. For a metal roof, there is no single safe spacing that works everywhere. A lighter covering does not let you reduce structural sections on your own. The designer needs the roof geometry, support layout and all layers. The length of the unsupported run is key. Two roofs of the same width may have a different structural system. An extra purlin changes how the structure performs, and removing it can worsen conditions. Consider the site location and weather exposure.

2026-11-14T19:54:04+01:00

How to choose a covering for a mansard roof

The covering for a mansard roof must be selected separately for the lower and upper slopes and for their junction, as each zone has different fixing and flashing requirements. Before choosing a material, check the actual angles and lengths of both sections, as well as the presence of dormers, chimneys and windows, which complicate sheet layout. The slope break is crucial: water from the upper part must drain safely onto the lower without backing up under the covering. Base the assessment on an accurate plan and sections, not on the roof name alone.

2026-11-14T16:31:31+01:00