Building basics2026-11-15T18:16:21+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Building basics

Sandwich-panel.pl explains the basics of choosing sandwich panels, PIR insulation boards and metal roofing. Learn how the core differs from the facings, what the thickness describes and how the sheet dimensions relate to the effective cover area. The guides are intended for people planning a garage, industrial building, workshop or farm building. They explain which details to collect before ordering, how to identify accessories and what to inspect when the goods arrive. Use the articles to compare materials and prepare the questions that need to be resolved for your project.

Eurothane G in the loft: internal insulation and layer junctions

In a loft, wall insulation must work together with the insulation of the roof slopes. Eurothane G should not end in a random gap at the slope. Designing this junction covers the continuity of the thermal layer, the sealing and the sequence in which the surfaces are finished. Recticel Eurothane G consists of a PIR board faced on both sides with a gas-tight facing, plus 12.5 mm plasterboard. It is intended for suitable internal insulation applications. When selecting PIR boards for the assembly, draw the internal wall lining that connects the Eurothane G PIR with the 12.5 mm plasterboard in the actual cross-section. The masonry under Eurothane G must be prepared in accordance with its condition and the requirements of the new build-up, because the remaining layers must fit the same solution.

How should you prepare a masonry wall for new insulated panel cladding?

Panel cladding can change the appearance of an old building and improve selected parameters of its walls. However, you should not start by screwing panels into random places on the masonry. First, the substrate, moisture and the way loads are transferred must be assessed. Then the supporting frame, anchors and connections at windows, the plinth and the roof are determined. The masonry may be made of brick, hollow blocks or concrete blocks, and its condition is often uneven. Render is not a layer on which the assessment of anchoring can be based. The substrate, joints and any damage must be identified. In an old workshop, successive alterations may have left different materials on one façade.

Choosing the shape and depth of a tile-effect roofing profile

The choice depends primarily on how well the profile matches the roof geometry and the conditions of use for a given model, not on wave height alone. Check whether the data sheet lists profile height, pitch and transverse rib separately, and what the module length and effective cover width are. Also consider how the shape works with valleys, openings and flashings. Only then compare samples for building proportions and the shadow effect you want. Bear in mind that a taller profile does not guarantee better coverage or approval for a lower pitch.

Choosing an off-the-shelf steel frame that fits the building you need

Not every project requires the geometry to be developed from scratch. If a standard steel hall is needed, it is worth checking the ready-made variants. The steel structures we offer use repeatable frames and fixed modules. They can be ordered from available batches. The condition of the selected set and the collection date are confirmed at the time of order, so that the construction schedule is based on specific availability. Among the duo-pitch structures, series with widths of 8, 10, 12, 14, 16, 18 and 20 metres are available. These are specific variants that must be matched to the needs of the interior. A steel hall should accommodate not only goods or machinery, but also traffic routes and servicing. Choose the width based on the floor plan, not on the planned building's floor area alone.

How do you determine the thickness of insulated sandwich panels for different zones of a building?

A single building may contain a warm workshop, a cool warehouse and a room with a lot of moisture side by side. They do not need identical panels, but their joints must form a coherent system. Thickness is selected after checking thermal insulation, load-bearing capacity and fire requirements. None of these conditions should be assessed solely on the basis of the others. Record the planned temperature in each zone and the heating period. It matters whether the door opens all day or only a few times a week. A product packing room may need different conditions from a warehouse for empty boxes, even with the same floor area.

How do modular sheet metal tiles differ from stone-coated roofing?

Modularity and a granular finish are two different features of a roof covering that can occur together. The modular layout concerns the format of the panels, while the stone granule finish describes the surface treatment. When choosing, check whether you are comparing the material in terms of appearance, construction and installation rules, not just the number of modules. The key decision variable is the complete system: from the profile and finish to the flashings and fixings. This allows you to assess whether a difference stems from the surface, the geometry or the accessories.