About PiVi

This author has not yet filled in any details.
So far PiVi has created 1593 blog entries.

Which roof covering suits a gable roof?

The choice of covering for a simple gable roof depends above all on the pitch, the building's function and the planned insulation layout, not on the shape of the slopes alone. It is worth checking the actual dimensions of the structure, including lengths, diagonals and the eaves line, because deviations after construction may affect the cutting plan. The article helps compare sheets cut to length, modular metal tiles, trapezoidal sheet and sandwich panels, taking into account transport, installation, ventilation and the cost of the finished roof.

By |2026-11-14T23:26:06+01:002024-03-08|Construction basics|Comments Off on Which roof covering suits a gable roof?

XPS between a hall and an office: detailing the floor junction

An office within a hall is often heated continuously, while the warehouse operates at a lower temperature. Both parts may also have different loads and floor levels. XPS helps to limit heat losses, but at their junction a well-thought-out detail is needed. Extruded polystyrene should not be selected separately for each room without checking the connection. It is precisely at the threshold, under the wall and next to the column that a discontinuity in the insulation can arise. The wall between the office and the hall may separate zones with different temperatures. In such a case, the heat flow does not end at the plane of the wall. It also covers the floor, its edge and structural elements.

By |2026-11-16T06:07:37+01:002024-03-04|Construction basics|Comments Off on XPS between a hall and an office: detailing the floor junction

EFIGREEN ALU+ in a bonded system: the role of the composite facing

The ALU+ composite surface is designed to work with a specific covering and fixing method. It should not be described in shorthand as any arbitrary aluminium sheet. The kraft paper, aluminium and PE layers are part of a specific product. The compatibility of the adhesive and of the other components must be confirmed for such a build-up. The function of EFIGREEN ALU+ must be described together with the layers adjacent to its surface. A key point of the connection is the contact between the composite facing and the selected adhesive layer. The basis for coordination is a cross-section showing the substrate, adhesive, insulation and covering. Before selecting materials, the board thickness and the surface and condition of the substrate intended for bonding must be established, so that the sequence of layers has a real reference.

By |2026-11-16T01:36:06+01:002024-03-01|Construction basics|Comments Off on EFIGREEN ALU+ in a bonded system: the role of the composite facing

What work does a roofer carry out?

A roofer mainly handles the outer layers of a roof that drain water and shield the building from the weather. The scope may include flashings, gutters, underlay and accessories, but it need not cover structural design or roof truss repairs – these tasks must be separated before work begins. The substrate must be prepared and the covering correctly fixed. With sheet metal on battens, check the batten geometry and sheet layout; with sandwich panels, supports, fasteners and joint seals matter. The roofer uses the instructions for the specific covering.

By |2026-11-14T19:53:12+01:002024-02-29|Construction basics|Comments Off on What work does a roofer carry out?

Specifying roof rafters: how timber grade, dimensions and machining affect cost

The choice of rafters is determined primarily by the structural design, not by the price of timber alone. Before ordering, you need to know the cross-sections, lengths and number of elements, as well as the required timber class and how it is to be prepared. Take account of the roof geometry and support layout, since corners or openings may call for different elements. When comparing offers, check that they cover the same scope of processing, transport and connections. Remember that a cheaper cubic metre does not always produce a cheaper finished roof structure.

By |2026-11-14T23:26:59+01:002024-02-20|Construction basics|Comments Off on Specifying roof rafters: how timber grade, dimensions and machining affect cost

Metal roof tile coatings and the conditions they are made for

When choosing a metal roofing tile, first compare specific coating variants rather than names alone. Check which layers make up the steel protection, what the steel and coating thicknesses are, and which environmental conditions the manufacturer declares. Polyester, polyurethane and multilayer systems differ in build and properties, so the group name does not define all parameters. Matt and gloss are appearance features, not full protection. Compare the finished product and its documentation, separating corrosion resistance from UV resistance and appearance retention.

By |2026-11-15T03:29:51+01:002024-02-04|Construction basics|Comments Off on Metal roof tile coatings and the conditions they are made for

Can photovoltaic roofing replace insulated sandwich roof panels?

A photovoltaic covering and an insulated roof panel perform different functions. The panel combines facings with an insulating core and behaves within a defined support arrangement. A steel BIPV panel can cover the roof and generate electricity at the same time, but it does not thereby become an insulated sandwich panel. Replacing one solution with the other requires the design of the entire building envelope. It is precisely this distinction that helps avoid errors when pricing a new roof. An insulated sandwich panel has a defined construction, thickness, core type and facings. Its parameters relate, among other things, to thermal insulation and to behaviour between supports in the intended arrangement. Selection covers span, loads and service conditions. This material cannot be reduced solely to the outer metal sheet visible on the roof.

By |2026-11-15T18:27:51+01:002024-02-02|Construction basics|Comments Off on Can photovoltaic roofing replace insulated sandwich roof panels?

Choosing metal fence pickets for a small plot

On a small property, the fence is seen up close. Its edges, fixings and rear side are visible. Metal fence pickets can create a calm backdrop for the garden, but too arbitrary a division can dominate the entire space. There is no single picket width that suits every small plot. What matters is the combination of height, gap, colour and distance from the windows. It is worth starting the choice with the view that the household members have in front of them every day. On a site plan, the fence is a thin line. From the kitchen window, it can occupy a significant part of the field of view. Mark the places where you spend most of your time. Then check whether the fence there is to be a backdrop or a screen. These two functions may require a different picket spacing. However, the entire boundary does not have to be resolved in the same way.

By |2026-11-15T18:26:11+01:002024-02-02|Construction basics|Comments Off on Choosing metal fence pickets for a small plot

Roof coverings for a house: how do the main options compare?

First establish the roof geometry, the condition of the structure and the requirements for the attic, and only then compare materials. A flat slope, a steep roof and a small extension may need different systems, so the list of permissible solutions for a specific house is usually shorter than the entire market offer. Also check local requirements for the building's appearance, if any apply. It is worth comparing two or three variants over the same scope: substrate, covering, flashings, accessories, transport and installation. For a renovation, add dismantling and repair work, and determine quantities from a cutting plan or item schedule rather than the house area alone.

By |2026-11-14T16:30:41+01:002024-01-28|Construction basics|Comments Off on Roof coverings for a house: how do the main options compare?

What are roof walkways and chimney access steps used for?

Roof ladders and chimney steps form a defined access route to the chimney, flashings and rooftop equipment, making them easier to inspect without walking over random areas of the covering. When planning, the first thing to establish is whether these elements are intended solely for movement or also as an anchor point for fall-protection equipment — this determines the choice of system. A step offers a small surface for the foot, while a roof ladder gives a wider platform at the chimney or at equipment requiring attention. Both should form a logical sequence, since a single platform without access can prove of little use.

By |2026-11-14T16:31:23+01:002024-01-22|Construction basics|Comments Off on What are roof walkways and chimney access steps used for?