About PiVi

This author has not yet filled in any details.
So far PiVi has created 1593 blog entries.

Is a solar carport the same as an integrated photovoltaic roof?

A solar carport describes the purpose of a structure, while a roof integrated with photovoltaics describes how the roof covering is constructed. These terms can overlap, but they are not interchangeable. Various PV constructions can be installed above a parking space. If the roof is to protect effectively against rain, the entire system, its connections and its water drainage must be assessed. A row of modules alone does not yet guarantee weathertightness. Most often it is a canopy that, in addition to sheltering the parking space, generates energy. Such a structure may have a lightweight steel frame, posts and a roof adapted to the available area. However, the name does not say whether the modules replace the covering, sit above it, or form a separate system with its own seals.

By |2026-11-15T18:27:28+01:002025-01-22|Construction basics|Comments Off on Is a solar carport the same as an integrated photovoltaic roof?

What are the benefits of cut-to-length tile-effect roofing sheets?

Cut-to-size metal roof tiles work best on simple, rectangular roof slopes, where they reduce the number of transverse joints. Before choosing this format, however, check the exact cutting plan for the specific roof, the transport and unloading options, and how the material will be passed onto the roof. The benefit depends on the geometry of the slope, not on the building's floor area alone. On roofs with dormers, valleys or difficult access, long sheets are not always more practical than modules, so compare the full cost and the organisation of installation.

By |2026-11-14T16:28:58+01:002025-01-19|Construction basics|Comments Off on What are the benefits of cut-to-length tile-effect roofing sheets?

Therma TF70 in floor assemblies: screed, insulation and heating

Kingspan Therma TF70 is a PIR board for heated and unheated floors, with a multi-layer facing containing aluminium on both sides. Here the thermal insulation works together with the substrate, screed, finish and protective layers. Before a thickness is selected, the overall build-up height at doors, stairs and adjacent rooms must be checked. The rigidity of the board does not replace even support or a load-distributing layer. The guide covers service grooves, junctions at walls, thermal parameters and how to read the declared compressive stress. It also helps to define the scope of works from substrate preparation to handing over the insulation for the subsequent layers.

By |2026-11-16T06:06:42+01:002025-01-13|Construction basics|Comments Off on Therma TF70 in floor assemblies: screed, insulation and heating

What to check before the first sandwich roof panel is lifted into place

Work out the laying sequence before ordering sandwich roof panels. It affects which ends need to be cut back, which flashings to order and when the roofers can start. For each panel group, the schedule should identify the core and surface finish as well as the panel dimensions, including thickness. Check that the drawings locate the end laps, rooflights and service penetrations. Confirm the laying direction and which sheet overlaps its neighbour before the panels go into production. An omission at that stage can mean rework and delays on site.

By |2026-11-15T03:29:48+01:002025-01-05|Construction basics|Comments Off on What to check before the first sandwich roof panel is lifted into place

BauderPIR M/MF with mineral facing in the roof system

The M/MF board is to remain in the system with a mineral surface beneath the covering. A proposed replacement with aluminium changes the contact layer, even if both cores are PIR. The assessment should cover adhesion, fixing and thermal data. Changing a single name in the schedule is not a sufficient system update. The cross-section under consideration comprises a roof with a PIR board with a mineral facing. The BauderPIR M/MF task must be described together with the layers adjoining its surface. An important junction point is the area of the fleece beneath the waterproofing layer. Before selecting materials, the thickness of the insulation to be ordered and the condition of the substrate beneath the covering must be established so that the sequence of layers has a real reference.

By |2026-11-16T01:36:25+01:002025-01-02|Construction basics|Comments Off on BauderPIR M/MF with mineral facing in the roof system

What are the benefits of metal fence pickets?

The advantages of a metal picket fence depend above all on matching the gaps to the needs of the property, not on the material alone. It is worth checking what picket rhythm will provide the desired privacy from the street and garden, whether the chosen system allows a layout on both sides of the rails, and how dense infill will affect wind loading. Repeatable geometry of components and the ability to replace individual parts also matter, though this requires keeping records of the profile and coating. On uneven ground, the method of stepping panels must be established and corners planned.

By |2026-11-14T23:28:26+01:002024-12-29|Construction basics|Comments Off on What are the benefits of metal fence pickets?

What does an eaves drip flashing do, and where should it discharge?

The eaves flashing strip captures water flowing down the roof slope and directs it into the gutter, while also protecting the vulnerable roof edge. At handover, check not only its length and colour but above all whether its cross-section matches the covering, drainage and underlay. The shape of the folds, continuity of fall and correct connections along the entire eaves length are crucial. The under-gutter strip serves a different purpose, so the names are often confused. What matters is adaptation to the specific roof system, not a universal template.

By |2026-11-14T16:30:45+01:002024-12-20|Construction basics|Comments Off on What does an eaves drip flashing do, and where should it discharge?

What are the benefits and design requirements of a flat roof?

A flat roof does not mean abandoning falls; it requires a considered layer build-up and drainage. Readers should check whether the roof's function — such as technical equipment, photovoltaics or planting — was defined at design stage, because each changes the loads. It is also worth verifying that water can drain even if the primary outlet is blocked, and that service access reaches key details. Durability depends on the structure, waterproofing and regular inspections, not on the absence of slopes alone.

By |2026-11-14T19:45:58+01:002024-12-19|Construction basics|Comments Off on What are the benefits and design requirements of a flat roof?

Will felt under steel sheet solve the dripping problem in an uninsulated building?

Felt under steel sheet can temporarily retain condensate and reduce dripping. However, it does not remove moisture from the building. To work, it must dry out afterwards. It makes most sense as part of a well-considered solution for an uninsulated building. If the roof leaks or the interior is constantly very humid, the fleece alone will not remove the cause. Moist air in contact with a sufficiently cool surface can release some of its vapour as water. A steel roof responds quickly to ambient conditions. In an uninsulated building, its underside is often a place where condensation forms. Drops can also form when it is not raining outside.

By |2026-11-14T12:36:33+01:002024-12-18|Construction basics|Comments Off on Will felt under steel sheet solve the dripping problem in an uninsulated building?

Roofing a pig house: assessing the suitability of corrugated fibre cement sheets

When choosing roofing for a piggery, more matters than price and colour. The roof is exposed to moisture, temperature changes and the environment associated with livestock farming. Corrugated fibre cement sheets should be checked as part of the whole system. Asbestos-free fibre cement can be a good solution if it suits the conditions of the building and its installations. An enquiry about the roof should state that it concerns a piggery. The seller and designer need information on ventilation, heating and the method of washing. It is not enough to write that the building is agricultural. This name covers both a well-ventilated shelter and a room with significantly higher humidity. It is worth indicating straight away whether the covering will be exposed from the interior.

By |2026-11-15T18:28:35+01:002024-12-16|Construction basics|Comments Off on Roofing a pig house: assessing the suitability of corrugated fibre cement sheets