About PiVi

This author has not yet filled in any details.
So far PiVi has created 1593 blog entries.

How to choose PIR for a house built from ceramic hollow blocks without overlooking the details?

A wall made of ceramic hollow blocks does not have a single fixed thermal performance. Thicknesses, the arrangement of voids, mortars and the condition of the existing masonry all vary. When choosing PIR, it is worth starting from this data and then looking at the windows, the plinth and the junction with the roof. A good insulation thickness must suit the whole house, including places that are not visible on a simple elevation. The name of the material alone is not enough for calculations. The wall thickness and the thermal conductivity value specific to the given arrangement are needed. In an existing house, it is worth checking the documentation, the wall at an opening or a safely made inspection opening. One should not choose the best parameter from among all available hollow blocks.

By |2026-11-14T10:16:52+01:002022-07-24|Construction basics|Comments Off on How to choose PIR for a house built from ceramic hollow blocks without overlooking the details?

Inspecting flashings on a steel building when several trades share the work

Roofs and walls made of sandwich panels are often erected in parallel with the installation of gutters, doors and services. Flashings connect the scope of these works. It is easy then to overlook a small element or to cover a joint before inspection. A well-planned handover covers successive stages, not just the finished façade. It allows checking what will no longer be visible once the works are complete. It is worth starting the review from the lower part of the walls. Starter profiles and plinth flashings are checked before subsequent layers are closed. The next groups cover corners, openings, eaves and the ridge. Such an order is clearer than a single list of elements without their location.

By |2026-11-15T03:33:24+01:002022-07-23|Construction basics|Comments Off on Inspecting flashings on a steel building when several trades share the work

Therma TT46 with TR26: a coordinated Kingspan roof insulation assembly

Kingspan Therma TT46 is a variable-thickness PIR board with aluminium-containing facings on both sides, intended for forming falls on flat roofs. It can complement insulation with Therma TR26. Selecting the tapered boards requires a joint solution for drainage, the base layer and the waterproofing: heights at the outlets, obstructions and edges must match one another. The thermal parameter of the highest edge does not describe the entire board, just as the average amount of material does not explain the support at the thinnest point. The guide discusses the arrangement of components, continuity of drainage and verification of loads and completeness of delivery for a specific roof plan.

By |2026-11-16T06:06:40+01:002022-07-20|Construction basics|Comments Off on Therma TT46 with TR26: a coordinated Kingspan roof insulation assembly

Which flashings does a roof need?

The set of flashings is determined by the roof geometry, not by colour alone. Begin with a cross-section drawing that shows where the metal ends and how water drains away. Check how the eaves, side edges, ridge, valley and junctions at the chimney and wall are resolved. For each detail, support, laps and compatibility with the covering matter. Names are often used imprecisely, so base the order on dimensions and function rather than on the element's name alone.

By |2026-11-14T23:28:06+01:002022-07-17|Construction basics|Comments Off on Which flashings does a roof need?

What affects the environmental impact of metal roofing?

A metal roof can be an environmentally friendly choice, but only when the comparison covers a complete roof with comparable insulation and service life, not just a sheet of steel. It is worth checking whether the environmental declaration refers to a specific product, which life-cycle stages it covers and whether its unit matches the actual covering area. The cutting plan and the expected dismantling also affect the final balance. Rather than general assurances, the decision should rest on documents and service assumptions.

By |2026-11-14T16:31:05+01:002022-07-13|Construction basics|Comments Off on What affects the environmental impact of metal roofing?

Replacing a fence in stages: planning metal pickets over several seasons

Not every fence is built in a single stage of work. Sometimes the front is replaced first, then the sides and the rear. Metal fence pickets are suitable for such planning, but they require an orderly specification. A colloquial colour name and a phone photo are not enough to reproduce the variant after a longer period. It is also worth knowing from the outset which old structural elements will remain. Staging should organise the investment, not carry unresolved problems over to the next season. The first stage is a review of the posts, rails and their connections. New sheet metal pickets will not automatically strengthen a worn structure. If a post is leaning or a connection is loose, the cause must be removed. Otherwise the aesthetic infill will conceal the problem only for a time. The assessment should also cover elements standing on sections planned for later modernisation.

By |2026-11-15T18:26:32+01:002022-07-05|Construction basics|Comments Off on Replacing a fence in stages: planning metal pickets over several seasons

How do you use the PIR calculator to choose a thickness for a specific wall?

The PIR thickness calculator is useful when it compares a known wall build-up with a specific board. It will not detect a hidden cavity, damp plaster or a thermal bridge at the ceiling. Treat it as a tool for organising options. Before you start calculating, note the wall build-up and the effect you want to achieve in the room, studio or small premises. You need the thicknesses of the layers and their thermal properties. If the calculator lets you choose a material from a list, check that the selected item matches the actual masonry. A hollow block with a similar name may have a different construction. In an older premises, it is worth filling in the missing information before buying insulation.

By |2026-11-14T10:17:15+01:002022-07-02|Construction basics|Comments Off on How do you use the PIR calculator to choose a thickness for a specific wall?

Rain and snow on farm roofs: why the details matter

Rain and snow load a farm roof in different ways. Fibre cement sheets are meant to protect the building, but they need correct laps, supports and drainage. Asbestos-free fibre cement will not be watertight simply because the material itself withstands the weather well. It is often the places that look inconspicuous from the ground that determine how a covering performs. The corrugations form a drainage path towards the eaves. Their arrangement must match the roof pitch and the system's specifications. An obstruction in the valley of a corrugation can hold back water or direct it onto a lap. That is why waste is removed after installation and the details around service penetrations are checked. Too low a pitch can lengthen the time water remains standing and increase the significance of rain driven in by wind.

By |2026-11-16T01:30:40+01:002022-06-28|Construction basics|Comments Off on Rain and snow on farm roofs: why the details matter

How can you recognise a well-prepared supplier of panels and sheets?

Warehouse size tells you little about how smoothly an order will go. A supplier should be able to identify the material, confirm the batch and say exactly what the delivery includes. Ask the same questions of a small depot as you would of a large distribution centre. For sandwich panels, look for the intended use, core, thickness, facings, coating and cover width. For trapezoidal steel sheet, check the profile, actual steel thickness, cover width and which face is intended to be exposed. Labels such as “insulated” or “for roofs” are too vague to check against the drawings.

By |2026-11-14T12:35:55+01:002022-06-24|Construction basics|Comments Off on How can you recognise a well-prepared supplier of panels and sheets?

A dark roof and metal pickets: keeping the frontage visually balanced

A dark roof is a strong element of the building form. If dark windows, a garage and a fence are added to it, the front can look very uniform. This is not always a problem. It is important that such an effect is intentional. Metal fence pickets allow rhythm and gaps to be introduced between dark surfaces. This makes it possible to reference the roof colour without creating a heavy wall from the street. However, the overall composition decides the result, not the choice of an anthracite coating alone. The roof colour does not have to be the only point of reference. Sheet-metal pickets can be matched to the windows and doors, the flashings or the garage door. It is worth choosing one dominant relationship. Trying to match the fence to several different shades at once often ends in an unclear compromise. It is better to define what is to be shared and what may consciously differ.

By |2026-11-15T18:26:51+01:002022-06-22|Construction basics|Comments Off on A dark roof and metal pickets: keeping the frontage visually balanced